!IMPORTANT! Exporting restraints on tobacco products to Australia.
From 1st of July, All NZ orders are sent with 18+ label, ID MUST be sighted on delivery.
The Feedlink Revvo kit still uses the same fantastic coil design, the ARC, ‘Aspire Radial Coil’. It still sits horizontally in the tank similar to a ‘stove-top’ design, and of course it still has the increased surface area of the original coil for great flavor and great vapor production. It just fits in a tank that is now even easier to fill!
The tank has the same awesome adjustable airflow with three large air inlets and comes in a TPD compliant 2ml version with no need for a larger tank due to the squonk style bottom feed filling system,just squeeze the squonk bottle and it’s filled
and ready to go again.
•Easy filling and innovative squonk bottle with more backup capacity
This is simplicity itself, just an anti-clockwise turn of the bottle retaining screw with release the bottle carrier and the bottle. Remove the bottle from the carrier, unscrew the metal top-cap and feeder tube and fill with your favorite e-liquid. Replace the top-cap/feeder tube, reinsert into the carrier and replace into the mod, remembering to replace and tighten the bottle retaining screw.
•Easy Squeeze and fill
To fill or top up the tank, gently squeeze the squonk bottle until you can see your e-liquid rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle squeeze or two. Once filled (just as with the original Revvo tank), if it’s a new coil or the coil has become dry for any reason, invert tank to saturate the coil before vaping.
•Battery life indication
•Battery Level: 3.9 – 4.2V (50 – 100%) Color of indicator light: Blue
•Battery Level: 3.5 – 3.8V (20 – 50%) Color of indicator light: Blue and Red
•Battery Level: ≤ 3.5 (0 – 20%) Color of indicator light: Red
•Easy battery installation
Similar to the squonk bottle removal/refilling, just unscrew the battery cap in the base of the mod, insert a fresh 18650 battery, positive post upper most towards the top of the mod, replace the screw-in battery cap firmly and the mod is ready to use.
Size: 48*124*30 mm
Colors: Black, Red, Grey, Green, Blue
Body materials: Aluminum alloy
Silicone bottle capacity: 7.0ml
Output voltage: 3.0-4.2V
Battery capacity: 650mAh
Atomizer head: EX 1.2ohm MTL. Head
1* Feedlink mod
1* 2ml Revvo Boost tank
2* Coils (0.10-0.14Ω)
1* Glass tube
2* Warning card
1* User manual
1* Warranty card